//Cable Tray Roll Forming Machine

Cable Tray Roll Forming Machine

Cable tray roll forming machine

Send Inquiry
Category:

Product Description

Cable tray roll forming machine

1. Plate cut: (final plate cut confirmed by both two parties)

Cable Tray Roll Forming Machine

2. Introduction

It is a fully automatic line, uncoiling, leveling, punching, shearing, and roller forming. It’s not necessary to remove any parts, by setting PLC program, it can automatically switch to needed sizes, different sizes shifted by adjusting assembling dies. Punching & to length finished at one time, very fast, steady and safe.

3. Product specification

No.Length (m)Width (mm)Height (mm)Thickness (mm)
1≥2-1010050-1001-2.0
2≥2-1020050-1001-2.0
3≥2-1030050-1001-2.0
4≥2-1040050-1001-2.0
5≥2-1050050-1001-2.0
6≥2-1060050-1001-2.0

 

4. Technical parameter

(1) Suitable material: C.R., galvanized steel, (Q195-Q235)

(2) Material thickness: 0.8-2.0mm

(3) Coil width: ≤1000mm

(4) Coil I.D.: ≤ Ф610mm ( normal Ф508mm, or as per client’s request)

(5) Product height:≤150mm

(6) Product width:≤600mm

(7) Line speed: 8-15m/min (big size low speed, and small size high speed)

(8) Product length: ≥2-10m

(9) Rolled product straightness accuracy: ≤±3mm/10m

(10) Rolled product angle accuracy: ≤±1-1.5°/10m

5. Working flow

Motor drive uncoiling—guide feeding—leveling—mechanical punching—hydraulic shearing—feeding—roll forming—plate unloading

6. Working flow diagram

Your Name (required)

Your Email (required)

Your Message

WhatsApp chat